用VBS写的VBS代码格式化工具VbsBeautifier

标签: , , , , ,

昨天在VBS吧看到一个精华帖《VBS代码格式化工具》,是用C++写的,区区VBS代码格式化,就不要劳C++大驾了吧,用VBS实现VBS代码格式化工具不是更自然么?

网上的VBS代码大部分都没有缩进,新手不知道要缩进,高手缩进了被某些个垃圾网站采集以后也就没有了缩进,还有以一些博客贴吧也会把缩进给吃掉。除了缩进之外,由于学VBS的大部分都是学批处理出身,代码风格还是跟写批处理一样难看。其实一般情况下用VbsEdit 5.2.4.0自带的代码格式化功能就行了,没有必要重复造轮子。只不过VbsEdit 5.2.4.0在格式化带有冒号的代码时不是很理想,加上我已经很久没有写过像样的VBS脚本了,所以还是决定造一下轮子。

2011年12月27日更新:在线VBScript代码格式化工具VbsBeautifier

因为代码比较长,所以贴在文章的最后,下面是VBS代码格式化工具的效果演示:

格式化前的VBS代码:

ON ERROR RESUME NEXT:Set fso = CreateObject("Scripting.FileSystemObject"):X=0:T=true:WhiLe T
Input=Inputbox("Filename Lowercase Batch Convertor"&vbcrlf&vbcrlf& _
"Please input the destination folder name. e.g. C:\Webmaster"&vbcrlf&vbcrlf& _
"Note: Do NOT add '\' in the end of folder name!","FLowercase Convertor","C:\")
iF Input="" then:Msgbox"Folder name is empty!",48,"Error!":T=true:else T=false:end If:wend
Msgbox"All files names of "&Input&" will be converted to lowercase now...",64,"Note"
fold(Input):Msgbox"Done! Total "&X&" file(s) were converted to lowercase.",64,"Done"
sub fold(Path):SET f=fso.GetFolder(Path):Set rf = fso.GetFolder(Path).files:Set fc = f.SubFolders
foR EACh fff in rf:lcf1=LCase(fso.GetAbsolutePathName(fff))
fso.MoveFile fff, lcf1:X=X + 1:next:for EacH f1 in fc:fold(f1)
Set file=fso.GetFolder(f1).files:fOR EACh ff iN file:lcf=LCase(fso.GetAbsolutePathName(ff))
fso.MoveFile ff,lcf:NEXT:NEXT:END sub

格式化后的VBS代码:

On Error Resume Next
Set fso = CreateObject("Scripting.FileSystemObject")
X = 0
T = True
While T
    Input = InputBox("Filename Lowercase Batch Convertor" & vbCrLf & vbCrLf & _
    "Please input the destination folder name. e.g. C:\Webmaster" & vbCrLf & vbCrLf & _
    "Note: Do NOT add '\' in the end of folder name!","FLowercase Convertor","C:\")
    If Input = "" Then
        MsgBox"Folder name is empty!",48,"Error!"
        T = True
    Else T = False
    End If
WEnd
MsgBox"All files names of " & Input & " will be converted to lowercase now...",64,"Note"
fold(Input)
MsgBox"Done! Total " & X & " file(s) were converted to lowercase.",64,"Done"
Sub fold(Path)
    Set f = fso.GetFolder(Path)
    Set rf = fso.GetFolder(Path).files
    Set fc = f.SubFolders
    For Each fff In rf
        lcf1 = LCase(fso.GetAbsolutePathName(fff))
        fso.MoveFile fff, lcf1
        X = X + 1
    Next
    For Each f1 In fc
        fold(f1)
        Set file = fso.GetFolder(f1).files
        For Each ff In file
            lcf = LCase(fso.GetAbsolutePathName(ff))
            fso.MoveFile ff,lcf
        Next
    Next
End Sub

VBS代码格式化工具的源码:

Option Explicit

If WScript.Arguments.Count = 0 Then
    MsgBox "请将要格式化的代码文件拖动到这个文件上", vbInformation, "使用方法"
    WScript.Quit
End If

'作者: Demon
'时间: 2011/12/24
'链接: http://demon.tw/my-work/vbs-beautifier.html
'描述: VBScript 代码格式化工具
'注意: 
'1. 错误的 VBScript 代码不能被正确地格式化
'2. 代码中不能含有%[comment]% %[quoted]%等模板标签, 有待改进
'3. 由2可知, 该工具不能格式化自身

Dim Beautifier, i
Set Beautifier = New VbsBeautifier

For Each i In WScript.Arguments
    Beautifier.BeautifyFile i
Next

MsgBox "代码格式化完成", vbInformation, "提示"


Class VbsBeautifier
    'VbsBeautifier类

    Private quoted, comments, code, indents
    Private ReservedWord, BuiltInFunction, BuiltInConstants, VersionInfo

    '公共方法
    '格式化字符串
    Public Function Beautify(ByVal input)
        code = input
        code = Replace(code, vbCrLf, vbLf)

        Call GetQuoted()
        Call GetComments()
        Call GetErrorHandling()

        Call ColonToNewLine()
        Call FixSpaces()
        Call ReplaceReservedWord()
        Call InsertIndent()
        Call FixIndent()

        Call PutErrorHandling()
        Call PutComments()
        Call PutQuoted()

        code = Replace(code, vbLf, vbCrLf)
        code =  VersionInfo & code
        Beautify = code
    End Function

    '公共方法
    '格式化文件
    Public Function BeautifyFile(ByVal path)
        Dim fso
        Set fso = CreateObject("scripting.filesystemobject")
        BeautifyFile = Beautify(fso.OpenTextFile(path).ReadAll)
        '备份文件以免出错
        fso.GetFile(path).Copy path & ".bak", True
        fso.OpenTextFile(path, 2, True).Write(BeautifyFile)
    End Function

    Private Sub Class_Initialize()
        '保留字
        ReservedWord = "And As Boolean ByRef Byte ByVal Call Case Class Const Currency Debug Dim Do Double Each Else ElseIf Empty End EndIf Enum Eqv Event Exit Explicit False For Function Get Goto If Imp Implements In Integer Is Let Like Long Loop LSet Me Mod New Next Not Nothing Null On Option Optional Or ParamArray Preserve Private Property Public RaiseEvent ReDim Rem Resume RSet Select Set Shared Single Static Stop Sub Then To True Type TypeOf Until Variant WEnd While With Xor"
        '内置函数
        BuiltInFunction = "Abs Array Asc Atn CBool CByte CCur CDate CDbl CInt CLng CSng CStr Chr Cos CreateObject Date DateAdd DateDiff DatePart DateSerial DateValue Day Escape Eval Exp Filter Fix FormatCurrency FormatDateTime FormatNumber FormatPercent GetLocale GetObject GetRef Hex Hour InStr InStrRev InputBox Int IsArray IsDate IsEmpty IsNull IsNumeric IsObject Join LBound LCase LTrim Left Len LoadPicture Log Mid Minute Month MonthName MsgBox Now Oct Randomize RGB RTrim Replace Right Rnd Round ScriptEngine ScriptEngineBuildVersion ScriptEngineMajorVersion ScriptEngineMinorVersion Second SetLocale Sgn Sin Space Split Sqr StrComp StrReverse String Tan Time TimeSerial TimeValue Timer Trim TypeName UBound UCase Unescape VarType Weekday WeekdayName Year"
        '内置常量
        BuiltInConstants = "vbBlack vbRed vbGreen vbYellow vbBlue vbMagenta vbCyan vbWhite vbBinaryCompare vbTextCompare vbSunday vbMonday vbTuesday vbWednesday vbThursday vbFriday vbSaturday vbUseSystemDayOfWeek vbFirstJan1 vbFirstFourDays vbFirstFullWeek vbGeneralDate vbLongDate vbShortDate vbLongTime vbShortTime vbObjectError vbOKOnly vbOKCancel vbAbortRetryIgnore vbYesNoCancel vbYesNo vbRetryCancel vbCritical vbQuestion vbExclamation vbInformation vbDefaultButton1 vbDefaultButton2 vbDefaultButton3 vbDefaultButton4 vbApplicationModal vbSystemModal vbOK vbCancel vbAbort vbRetry vbIgnore vbYes vbNo vbCr vbCrLf vbFormFeed vbLf vbNewLine vbNullChar vbNullString vbTab vbVerticalTab vbUseDefault vbTrue vbFalse vbEmpty vbNull vbInteger vbLong vbSingle vbDouble vbCurrency vbDate vbString vbObject vbError vbBoolean vbVariant vbDataObject vbDecimal vbByte vbArray WScript"
        '版本信息
        VersionInfo = Chr(39) & Chr(86) & Chr(98) & Chr(115) & Chr(66) & Chr(101) & Chr(97) & Chr(117) & Chr(116) & Chr(105) & Chr(102) & Chr(105) & Chr(101) & Chr(114) & Chr(32) & Chr(49) & Chr(46) & Chr(48) & Chr(32) & Chr(98) & Chr(121) & Chr(32) & Chr(68) & Chr(101) & Chr(109) & Chr(111) & Chr(110) & Chr(13) & Chr(10) & Chr(39) & Chr(104) & Chr(116) & Chr(116) & Chr(112) & Chr(58) & Chr(47) & Chr(47) & Chr(100) & Chr(101) & Chr(109) & Chr(111) & Chr(110) & Chr(46) & Chr(116) & Chr(119) & Chr(13) & Chr(10)
        '缩进大小
        Set indents = CreateObject("scripting.dictionary")
        indents("if") = 1
        indents("sub") = 1
        indents("function") = 1
        indents("property") = 1
        indents("for") = 1
        indents("while") = 1
        indents("do") = 1
        indents("for") = 1
        indents("select") = 1
        indents("with") = 1
        indents("class") = 1
        indents("end") = -1
        indents("next") = -1
        indents("loop") = -1
        indents("wend") = -1
    End Sub

    Private Sub Class_Terminate()
        '什么也不做
    End Sub

    '将字符串替换成%[quoted]%
    Private Sub GetQuoted()
        Dim re
        Set re = New RegExp
        re.Global = True
        re.Pattern = """.*?"""
        Set quoted = re.Execute(code)
        code = re.Replace(code, "%[quoted]%")
    End Sub

    '将%[quoted]%替换回字符串
    Private Sub PutQuoted()
        Dim i
        For Each i In quoted
            code = Replace(code, "%[quoted]%", i, 1, 1)
        Next
    End Sub

    '将注释替换成%[comment]%
    Private Sub GetComments()
        Dim re
        Set re = New RegExp
        re.Global = True
        re.Pattern = "'.*"
        Set comments = re.Execute(code)
        code = re.Replace(code, "%[comment]%")
    End Sub

    '将%[comment]%替换回注释
    Private Sub PutComments()
        Dim i
        For Each i In comments
            code = Replace(code, "%[comment]%", i, 1, 1)
        Next
    End Sub

    '将冒号替换成换行
    Private Sub ColonToNewLine
        code = Replace(code, ":", vbLf)
    End Sub

    '将错误处理语句替换成模板标签
    Private Sub GetErrorHandling()
        Dim re
        Set re = New RegExp
        re.Global = True
        re.IgnoreCase = True
        re.Pattern = "on\s+error\s+resume\s+next"
        code = re.Replace(code, "%[resumenext]%")
        re.Pattern = "on\s+error\s+goto\s+0"
        code = re.Replace(code, "%[gotozero]%")
    End Sub

    '将模板标签替换回错误处理语句
    Private Sub PutErrorHandling()
        code = Replace(code, "%[resumenext]%", "On Error Resume Next")
        code = Replace(code, "%[gotozero]%", "On Error GoTo 0")
    End Sub

    '格式化空格
    Private Sub FixSpaces()
        Dim re
        Set re = New RegExp
        re.Global = True
        re.IgnoreCase = True
        re.MultiLine = True
        '去掉每行前后的空格
        re.Pattern = "^[ \t]*(.*?)[ \t]*$"
        code = re.Replace(code, "$1")
        '在操作符前后添加空格
        re.Pattern = "[ \t]*(=|<|>|-|\+|&|\*|/|\^|\\)[ \t]*"
        code = re.Replace(code, " $1 ")
        '去掉<>中间的空格
        re.Pattern = "[ \t]*<\s*>[ \t]*"
        code = re.Replace(code, " <> ")
        '去掉<=中间的空格
        re.Pattern = "[ \t]*<\s*=[ \t]*"
        code = re.Replace(code, " <= ")
        '去掉>=中间的空格
        re.Pattern = "[ \t]*>\s*=[ \t]*"
        code = re.Replace(code, " >= ")
        '在行尾的 _ 前面加上空格
        re.Pattern = "[ \t]*_[ \t]*$"
        code = re.Replace(code, " _")
        '去掉Do While中间多余的空格
        re.Pattern = "[ \t]*Do\s*While[ \t]*"
        code = re.Replace(code, "Do While")
        '去掉Do Until中间多余的空格
        re.Pattern = "[ \t]*Do\s*Until[ \t]*"
        code = re.Replace(code, "Do Until")
        '去掉End Sub中间多余的空格
        re.Pattern = "[ \t]*End\s*Sub[ \t]*"
        code = re.Replace(code, "End Sub")
        '去掉End Function中间多余的空格
        re.Pattern = "[ \t]*End\s*Function[ \t]*"
        code = re.Replace(code, "End Function")
        '去掉End If中间多余的空格
        re.Pattern = "[ \t]*End\s*If[ \t]*"
        code = re.Replace(code, "End If")
        '去掉End With中间多余的空格
        re.Pattern = "[ \t]*End\s*With[ \t]*"
        code = re.Replace(code, "End With")
        '去掉End Select中间多余的空格
        re.Pattern = "[ \t]*End\s*Select[ \t]*"
        code = re.Replace(code, "End Select")
        '去掉Select Case中间多余的空格
        re.Pattern = "[ \t]*Select\s*Case[ \t]*"
        code = re.Replace(code, "Select Case ")
    End Sub

    '将保留字 内置函数 内置常量 替换成首字母大写
    Private Sub ReplaceReservedWord()
        Dim re, words, word
        Set re = New RegExp
        re.Global = True
        re.IgnoreCase = True
        re.MultiLine = True

        words = Split(ReservedWord, " ")
        For Each word In words
            re.Pattern = "(\b)" & word & "(\b)"
            code = re.Replace(code, "$1" & word & "$2")
        Next

        words = Split(BuiltInFunction, " ")
        For Each word In words
            re.Pattern = "(\b)" & word & "(\b)"
            code = re.Replace(code, "$1" & word & "$2")
        Next

        words = Split(BuiltInConstants, " ")
        For Each word In words
            re.Pattern = "(\b)" & word & "(\b)"
            code = re.Replace(code, "$1" & word & "$2")
        Next
    End Sub

    '插入缩进
    Private Sub InsertIndent()
        Dim lines, line, i, n, t, delta
        lines = Split(code, vbLf)
        n = UBound(lines)
        For i = 0 To n
            line = lines(i)
            SingleLineIfThen line
            t = delta
            delta = delta + CountDelta(line)

            If t <= delta Then
                lines(i) = String(t, vbTab) & lines(i)
            Else
                lines(i) = String(delta, vbTab) & lines(i)
            End If
        Next
        code = Join(lines, vbLf)
    End Sub

    '调整错误的缩进
    Private Sub FixIndent()
        Dim lines, i, n, re
        Set re = New RegExp
        re.IgnoreCase = True
        lines = Split(code, vbLf)
        n = UBound(lines)
        For i = 0 To n
            re.Pattern = "^\t*else"
            If re.Test(lines(i)) Then
                lines(i) = Replace(lines(i), vbTab, "", 1, 1)
            End If
        Next
        code = Join(lines, vbLf)
    End Sub

    '计算缩进大小
    Private Function CountDelta(ByRef line)
        Dim i, re, delta
        Set re = New RegExp
        re.Global = True
        re.IgnoreCase = True
        For Each i In indents.Keys
            re.Pattern = "^\s*\b" & i & "\b"
            If re.Test(line) Then
                '方便调试
                'WScript.Echo line
                line = re.Replace(line, "")
                delta = delta + indents(i)
            End If
        Next
        CountDelta = delta
    End Function

    '处理单行的If Then
    Private Sub SingleLineIfThen(ByRef line)
        Dim re
        Set re = New RegExp
        re.IgnoreCase = True
        re.Pattern = "if.*?then.+"
        line = re.Replace(line, "")
        '去掉Private Public前缀
        re.Pattern = "(private|public).+?(sub|function|property)"
        line = re.Replace(line, "$2")
    End Sub

End Class
'Demon, 于2011年平安夜

随机文章:

  1. WordPress Cron 定时任务
  2. VBS监视网络连接与断开
  3. 命令行的长度限制是多少?
  4. 使用Image Generator (Image Builder)生成OpenWrt固件
  5. 用VBS获取Unix时间戳

18 条评论 发表在“用VBS写的VBS代码格式化工具VbsBeautifier”上

  1. 雨中风铃说道:

    做个网页版的,类似于:http://www.yongfa365.com/Tools/CodeColor/js-format-compress.html

    做好能着色:http://www.yongfa365.com/Tools/CodeColor/JavaScript-Version-CodeColor.html

  2. itianda说道:

    支持下,正则是个好东西

  3. shirne说道:

    提点改进意见哈:
    最好能支持unicode文件.
    你之前也写过通过BOM判断文件编码和判断无BOM文件的编码,如果能融合进来,似乎会完美一些

  4. […] 根据雨中风铃在《用VBS写的VBS代码格式化工具VbsBeautifier》中的建议,写了一个在线版的VBScript代码格式化工具。 […]

  5. Firefly说道:

    这个很好,可以作为EmEditor的外置式VBS代码格式化工具了!

  6. 喜欢批处理说道:

    博主新年好!!
    我不是程序员, 不过有时候需要写一些批处理.
    希望博主能考虑写一个格式化批处理的脚本, 方便一下广大群众.
    先谢过了!

    • Demon说道:

      你好,也祝你新年快乐。

      我不喜欢批处理,批处理没有任何语法可言,想写一个格式化工具非常的困难。

  7. mo_gua说道:

    博主辛苦了。博主写的东西学习了。超级赞。
    发现有点小问题博主可否完善下:
    一是if语句后有注释当作单行if语句处理了。
    二是博主把冒号直接替换为回车,这于逻辑有时候是不对的。
    谢谢~~~~~~~~~~

  8. Pw说道:

    博主,我在使用中发现一个小bug:
    对于包含16进制常数“&HXXXXXX”的代码中间依然添加了空格,导致vbsedit编译通不过。

    稍微修改这句代码可以排除这种情况:
    ‘在操作符前后添加空格
    re.Pattern = “[ \t]*(=||-|\+|&(?!H)|\*|/|\^|\\)[ \t]*”

    是楼主的这个代码让我接触并了解了正则表达式,感谢!

  9. 小心肝说道:

    我也写了个,不过冒号:没考虑哈。直接readline哈哈,简单直接,正好偷懒。。。

    代码如下:

    add()
    dim text,fso,regex,dic,dic2,sn,n
    sn=8
    Set fso = CreateObject(“scripting.filesystemobject”)
    Set dic = CreateObject(“Scripting.Dictionary”)
    Set dic2 = CreateObject(“Scripting.Dictionary”)
    Set regex = New RegExp
    regex.IgnoreCase =True
    Set file = fso.OpenTextFile(WScript.Arguments.Item(0),1,true)
    Do While file.AtEndOfStream True
    strtxt=trim(replace(file.readline,vbtab,” “))
    regex.pattern=”^(\bif[\s\S]+then [^’]{2,}[\s\S]+)”
    if not regex.test(strtxt) Then
    regex.pattern=”^(f\bfunction\b|\bsub\b|\bclass\b|\bprivate function\b|\bpublic function\b|\bprivate sub\b|\bpublic sub\b)”
    if regex.test(strtxt) then
    fun=fun+1
    strTabNumber=””
    end If
    regex.pattern=”^(\bend function\b|\bend sub\b|\bend class\b)”
    if regex.test(strtxt) then
    fun=fun-1
    strTabNumber=””
    end If

    regex.Pattern=”^(\bif\b|\bdo\b|\bfor\b|\bselect\b)”
    if regex.test(strtxt) then
    if fun=0 then
    n=dic.Count+1
    dic.add n,strtxt
    strTabNumber=space(dic.count*sn)
    else
    m=dic2.Count+1
    dic2.add m,strtxt
    strTabNumber=space(dic2.count*sn)
    end If
    Else

    regex.Pattern=”^(\belse\b|\belseif\b|\bcase\b)”
    If regex.test(strtxt) then
    if fun=0 then
    If dic.Count>=1 Then strTabNumber=space((dic.Count)*sn)
    Else
    If dic2.Count>=1 Then strTabNumber=space((dic2.Count)*sn)
    End If
    Else
    if fun=0 then
    If dic.Count>=1 Then strTabNumber=space((dic.Count+1)*sn)
    Else
    If dic2.Count>=1 Then strTabNumber=space((dic2.Count+1)*sn)
    End If
    End If

    regex.pattern=”^(end if|next|end select|loop|wend)”
    if regex.test(strtxt) then
    if fun=0 Then
    dic.Remove(dic.Count)
    n=dic.Count
    strTabNumber=space((dic.Count+1)*sn)
    Else
    dic2.remove(dic2.Count)
    m=dic2.Count
    strTabNumber=space((dic2.Count+1)*sn)
    End If
    Else
    if fun0 Then
    If dic2.Count=0 Then strTabNumber=””
    Else
    If dic.Count=0 Then strTabNumber=””
    End if
    end If
    End If
    Else
    if fun0

  10. 小心肝说道:

    add()
    dim text,fso,regex,dic,dic2,sn,n
    sn=8
    Set fso = CreateObject(“scripting.filesystemobject”)
    Set dic = CreateObject(“Scripting.Dictionary”)
    Set dic2 = CreateObject(“Scripting.Dictionary”)
    Set regex = New RegExp
    regex.IgnoreCase =True
    Set file = fso.OpenTextFile(WScript.Arguments.Item(0),1,true)
    Do While file.AtEndOfStream True
    strtxt=trim(replace(file.readline,vbtab,” “))
    regex.pattern=”^(\bif[\s\S]+then [^’]{2,}[\s\S]+)”
    if not regex.test(strtxt) Then
    regex.pattern=”^(f\bfunction\b|\bsub\b|\bclass\b|\bprivate function\b|\bpublic function\b|\bprivate sub\b|\bpublic sub\b)”
    if regex.test(strtxt) then
    fun=fun+1
    strTabNumber=””
    end If
    regex.pattern=”^(\bend function\b|\bend sub\b|\bend class\b)”
    if regex.test(strtxt) then
    fun=fun-1
    strTabNumber=””
    end If

    regex.Pattern=”^(\bif\b|\bdo\b|\bfor\b|\bselect\b)”
    if regex.test(strtxt) then
    if fun=0 then
    n=dic.Count+1
    dic.add n,strtxt
    strTabNumber=space(dic.count*sn)
    else
    m=dic2.Count+1
    dic2.add m,strtxt
    strTabNumber=space(dic2.count*sn)
    end If
    Else

    regex.Pattern=”^(\belse\b|\belseif\b|\bcase\b)”
    If regex.test(strtxt) then
    if fun=0 then
    If dic.Count>=1 Then strTabNumber=space((dic.Count)*sn)
    Else
    If dic2.Count>=1 Then strTabNumber=space((dic2.Count)*sn)
    End If
    Else
    if fun=0 then
    If dic.Count>=1 Then strTabNumber=space((dic.Count+1)*sn)
    Else
    If dic2.Count>=1 Then strTabNumber=space((dic2.Count+1)*sn)
    End If
    End If

    regex.pattern=”^(end if|next|end select|loop|wend)”
    if regex.test(strtxt) then
    if fun=0 Then
    dic.Remove(dic.Count)
    n=dic.Count
    strTabNumber=space((dic.Count+1)*sn)
    Else
    dic2.remove(dic2.Count)
    m=dic2.Count
    strTabNumber=space((dic2.Count+1)*sn)
    End If
    Else
    if fun0 Then
    If dic2.Count=0 Then strTabNumber=””
    Else
    If dic.Count=0 Then strTabNumber=””
    End if
    end If
    End If
    Else
    if fun0 Then
    If dic2.Count0 Then strTabNumber=space((dic2.Count+1)*sn)
    Else
    If dic.Count0 Then strTabNumber=space((dic.Count+1)*sn)
    End if
    end if
    If strtxt”” Then text=text&strTabNumber&strtxt&vbCrLf
    loop
    file.close
    set file=nothing
    Set file = fso.OpenTextFile(WScript.Arguments.Item(0),2,true)
    file.write text
    file.close
    set file=Nothing
    Sub add()
    Dim wsh
    Set wsh = CreateObject(“wscript.shell”)
    ‘ 直接运行脚本则提醒*******************************************
    If WScript.Arguments.Count=0 Then
    Wsh.RegWrite “HKEY_LOCAL_MACHINE\SOFTWARE\Classes\VBSFile\shell\VbsFormatTool\”, “VBS代码格式化工具”, “REG_SZ”
    Wsh.RegWrite “HKEY_LOCAL_MACHINE\SOFTWARE\Classes\VBSFile\\shell\VbsFormatTool\command\”, “wscript.exe “&Chr(34)&WScript.ScriptFullName&Chr(34)&Chr(32)&chr(34)&”%1″&chr(34), “REG_SZ”
    wsh.Popup “VBS代码格式化工具”,9,”请不要直接运行脚本”,64
    WScript.Quit
    End If
    End Sub
    Dim tt
    Set tt=createobject(“sapi.spvoice”)
    tt.speak(“OK”)
    MsgBox “完成”

留下回复